2.5.10 RFI setup in checklist & go live

Go to the projects tab
Go inside the project, click on the RFI setup button at the top and you will come inside that
RFI has default three questions as per standardised process, you can either go ahead with these questions and save it or else can add modify current qsts or add new questions bu clicking on the +Add button.
Next, in to settings tab >> you can turn on or off the witness and drawings and re/rfi button. Let me tell you what re-rfi is for an instance: In case of Fail/Redo - RFI initiator has to do re-rfi to start inspection again >> after changes click on save button
Click on the “save” button at the top >> confirm >> there you go project RFI setup successfully and the status is LIVE.

Go to the projects tab
Go inside the project, click on the RFI setup button at the top and you will come inside that
RFI has default three questions as per standardised process, you can either go ahead with these questions and save it or else can add modify current qsts or add new questions bu clicking on the +Add button.
Next, in to settings tab >> you can turn on or off the witness and drawings and re/rfi button. Let me tell you what re-rfi is for an instance: In case of Fail/Redo - RFI initiator has to do re-rfi to start inspection again >> after changes click on save button
Click on the “save” button at the top >> confirm >> there you go project RFI setup successfully and the status is LIVE.

-