The EQC list in the Inspect module is organised into three tabs — Available, Paused, and Approval. Each tab groups inspections by their current status, so you can quickly see what is ready to start, what you've left incomplete, and what is going through approval. A separate To Do list (your approval queue) sits in the bottom navigation bar, not inside the EQC list.
On mobile, this list is team-scoped — you see only the EQCs your team is doing and that are assigned to you (see 2.2.19).
Open the Inspect module (mobile app) to see your EQC list with its three tabs.
Tap a tab to see the EQCs in that status:
Available — inspections where the current stage is completed and the next stage is ready to start. You see action cards for your stage type (RFI or inspection), plus view-only cards for the other stage type (tapping one explains why). Tap an action card to begin the next stage.
Paused — your own work that you started but left incomplete. It stays locked to you and is not available to other users; you can resume it whenever you're ready.
Approval — EQCs that are "Approval pending" (sent for approval) or that have come back as a Redo (actionable).
To Do is not a tab in the EQC list — it is in the bottom navigation bar. It is your approval queue:
To-be Approved — shows an EQC only while you are the approver of its current active stage and level.
Draft — a personal sub-tab holding approval reviews you saved as Draft; only you can see them.
Once an EQC is fully completed — all its stages PASSED — it is no longer shown in the mobile app. You can then view that completed EQC in the web app at app.digiqc.com.
Three — Available, Paused, and Approval. The To Do approval queue is separate; you'll find it in the bottom navigation bar, not in the EQC list.
Inspections whose current stage is complete and whose next stage is ready to start. You see action cards for your stage type and view-only cards for the other stage type.
Inspection data is now team-scoped: in Available and Approval you see the EQCs your team is doing (the doer team) and that are assigned to you. Paused shows only your own incomplete work. To-be Approved (bottom bar) shows only the stage and level you must approve. For the full rule, see 2.2.19.
Because inspection data is now team-scoped — you only see EQCs your team is doing and that are assigned to you. The first team to act on a stage type locks it to their team (see 2.2.19).
No. Paused holds your own started-but-incomplete work. It is locked to you and not available to other users — only you can resume it.
Approval (a tab in the EQC list) shows EQCs that are Approval pending or came back as a Redo — your team's work assigned to you. To Do → To-be Approved (bottom navigation bar) shows only the stage and level you must approve now. One is what you're waiting on; the other is what's waiting on you.
Once an EQC's stages are all PASSED, it is removed from the mobile app and can be viewed in the web app at app.digiqc.com.
The EQC list (Inspect) has three tabs — Available, Paused, Approval. To Do is in the bottom navigation bar, not an EQC-list tab.
The list is team-scoped: Available & Approval show your team's (doer) EQCs that are assigned to you (see 2.2.19).
Available shows action cards for your stage type and view-only cards for the other.
Paused shows only your own incomplete work — private to you, not available to others.
To Do → To-be Approved shows only the stage and level awaiting your approval; Draft holds your saved approval reviews.
A fully completed EQC (all stages PASS) is no longer available on mobile — view it in the web app (app.digiqc.com).
2.2.19 How does team-scoped visibility work on mobile?
2.2.1 How to start a new Inspection/EQC?
2.2.4 How to start the next stage of the same EQC?
2.2.6 How does a stage pass after the approver approves?
2.2.15 Re-inspect redo checklist
