While inspecting, you may notice something on site that the predefined checklist does not cover. digiQC lets you add an additional point — your own extra checkpoint — right inside the inspection, so the observation is recorded against the same EQC. It is optional, and you can add as many additional points as you need.
Start or open an inspection and go to the checkpoint screen of the Inspect module (mobile app).
After going through the listed checkpoints, tap "Additional point +".
Write the additional point description — this is mandatory.
(Optional) Add an audio remark, a photo, or both.
Mark the point as Pass or Fail.
To record more observations, tap "Additional point +" again — you can add multiple additional points.
Continue to the end of the inspection and finish as usual (Pass / Seek approval). The additional points are saved with the EQC and appear in the report.
Yes. The "Additional point +" option is available on the checkpoint screen while you are carrying out the inspection, after the predefined checkpoints.
When you observe something on site that the predefined checkpoints don't cover, but which still needs to be recorded for that inspection.
No. It is an optional feature — add one only when you need to capture something extra.
The description is mandatory. The photo and the audio remark are optional — add them only if needed.
Yes — tap "Additional point +" again for each extra point. You can add as many as you need.
It is saved against the same EQC and is included in the inspection, so it shows up in the EQC report along with the regular checkpoints.
An additional point behaves like a normal checkpoint: it can be marked Pass or Fail, and can carry a photo and an audio remark.
The description is mandatory; the photo and audio remark are optional.
You can add multiple additional points in the same inspection.
The feature lives on the checkpoint screen during an inspection — it is meant for observations noticed while inspecting on site.
2.2.1 How to start a new Inspection/EQC?
2.2.5 EQC list explanation — Available, Paused & Approval
2.2.11 How to download EQC reports from web app?
